0
0.0
Mar 19, 2024
03/24
by
BELARUSTV
tv
eye 0
favorite 0
quote 0
aster, now it takes me a month to, let’s say, make one bollaki prima , well, about a month, just likee tried... and this way and that it’s impossible to speed it up, it doesn’t work , especially thin finishing, you need to give time for good drying, there are a lot of thin layers, and so on, a thick layer cannot immediately crack, so high-quality finishing takes a lot of time, there’s practically no way to speed it up , since the designs, let’s say of the same lulaika, are somewhat different, there are... there are six rivets, there are nine, there are some with veins without veins, that is, well , i’ll say approximately that on my instruments - this is approximately a hundred parts to get a high-quality instrument, i use either canadian red cedar or high-quality resonant spruce; lately i have been able to buy caucasian spruce as a spruce, according to some reports... this is considered one of the best that can be. the body can be made from different materials, we also tried it, different timbre, different sound, the easiest and most technologically advanced way to work is with maple,
aster, now it takes me a month to, let’s say, make one bollaki prima , well, about a month, just likee tried... and this way and that it’s impossible to speed it up, it doesn’t work , especially thin finishing, you need to give time for good drying, there are a lot of thin layers, and so on, a thick layer cannot immediately crack, so high-quality finishing takes a lot of time, there’s practically no way to speed it up , since the designs, let’s say of the same lulaika, are somewhat...
0
0.0
Mar 19, 2024
03/24
by
BELARUSTV
tv
eye 0
favorite 0
quote 0
aster, now i have to say so, it takes a month to make one bala , well, about a month, like... and weed this and that to speed it up, it doesn’t work, especially thin finishing, you need to give it time for good drying, a lot of thin... layers and so on , a thick layer cannot immediately crack, so high-quality finishing takes a lot of time , there is practically no way to speed it up, since the designs, let’s say the same hololike , are somewhat different , there are seven rivets, there are six, there are nine, there are with veins without veins, that is, well, i’ll say approximately i think that on my instruments there are about a hundred parts. in order to get a high- quality instrument, i use either canadian red cedar or high-quality resonant spruce. recently, it has been possible to buy caucasian spruce as a spruce. according to some sources , this is considered one of the best that can be. the body can be made from different materials, we also tried it, different timbre, different sound. it is easiest and most technologically advanced to work with maple, that is, where the body i
aster, now i have to say so, it takes a month to make one bala , well, about a month, like... and weed this and that to speed it up, it doesn’t work, especially thin finishing, you need to give it time for good drying, a lot of thin... layers and so on , a thick layer cannot immediately crack, so high-quality finishing takes a lot of time , there is practically no way to speed it up, since the designs, let’s say the same hololike , are somewhat different , there are seven rivets, there are...
0
0.0
Mar 16, 2024
03/24
by
BELARUSTV
tv
eye 0
favorite 0
quote 0
aster, now i have, let’s say, making one prim balaka takes ... a month, well, about a month, as we tried finishing, you need to give it time for... good drying, a lot of thin layers, and so on, a thick layer cannot immediately crack, so high-quality finishing takes a lot of time , there is practically no way to speed it up, since the designs, let’s say the same hololike, are somewhat different, there are seven rivets, there are six, there are nine with veins without veins, that is, well i’ll say roughly that... in my instruments there are about a hundred parts, to get a high-quality instrument, i use either canadian red cedar or high-quality resonant spruce; lately i’ve been able to buy caucasian spruce as a spruce, according to some reports this is considered one of the best, which can be, the body can be made from different materials then... we tried it, different timbre, different sound, the easiest and most technologically advanced way to work is with maple, that is, where the body is made of maple, it is well processed , a very technologically advanced material, quite beautiful, qui
aster, now i have, let’s say, making one prim balaka takes ... a month, well, about a month, as we tried finishing, you need to give it time for... good drying, a lot of thin layers, and so on, a thick layer cannot immediately crack, so high-quality finishing takes a lot of time , there is practically no way to speed it up, since the designs, let’s say the same hololike, are somewhat different, there are seven rivets, there are six, there are nine with veins without veins, that is, well...
0
0.0
Mar 19, 2024
03/24
by
BELARUSTV
tv
eye 0
favorite 0
quote 0
aster, now it takes me a month to, let’s say, make one prima, well, about a month, as we tried and soially fine finishing, we need to give time there for good listening, a lot of thin layers, and so on, a thick layer is not allowed. will immediately crack, so high-quality finishing takes a lot of time, there is practically no way to speed it up, since the designs of, say, the same kolulalaika are somewhat different, there are seeds, there are six, there are nine, there are some with veins without veins, that is, well , i’ll roughly say that on my instruments it’s about a hundred parts to get a high-quality one. the instrument i use is either canadian red cedar or high-quality resonant spruce; the type of spruce i have recently been able to buy is caucasian spruce, according to some sources it is considered one of the best, which can be, the body can be made from different materials, we also tried it, different timbre, different sound, simpler and more technologically advanced total. work with maple, that is, where the body is made of maple, it is well processed, a very technologically
aster, now it takes me a month to, let’s say, make one prima, well, about a month, as we tried and soially fine finishing, we need to give time there for good listening, a lot of thin layers, and so on, a thick layer is not allowed. will immediately crack, so high-quality finishing takes a lot of time, there is practically no way to speed it up, since the designs of, say, the same kolulalaika are somewhat different, there are seeds, there are six, there are nine, there are some with veins...
0
0.0
Mar 15, 2024
03/24
by
BELARUSTV
tv
eye 0
favorite 0
quote 0
aster, now i have, let’s say, , it takes a month to make one bollaki prima, well, about a month, asyou need to give time for good drying, a lot of thin layers, and so on, a thick layer is not allowed will immediately crack, so a high-quality finish it takes a lot of time, there’s practically no way to speed it up, since the designs of, say , the same hololike are somewhat different, there are some with seven rivets, some with six, some with nine, some with veins without veins, that is, i ’ll say roughly , that on my instruments there are about a hundred parts to get... recently it has been possible to buy exactly caucasian spruce, according to some sources it is considered one of the best, which can be, the body can be made from different materials, we also tried , different timbre, different sounds, it is easier and more technologically advanced to work with maple, that is, where the body is made of maple, it is well processed, a very technologically advanced material, quite beautiful, quite sonorous. exotic woods, rosewood , poduk, zebran, they can give a brighter, stronger sound,
aster, now i have, let’s say, , it takes a month to make one bollaki prima, well, about a month, asyou need to give time for good drying, a lot of thin layers, and so on, a thick layer is not allowed will immediately crack, so a high-quality finish it takes a lot of time, there’s practically no way to speed it up, since the designs of, say , the same hololike are somewhat different, there are some with seven rivets, some with six, some with nine, some with veins without veins, that is, i...
0
0.0
Mar 23, 2024
03/24
by
1TV
tv
eye 0
favorite 0
quote 0
, but she cannot stand the moscow climate, the doctors exiled me like tsar alexander sergeevich pushkinst on surgery. yes, no , nothing serious, anna stepana, just lie down and rest, but lie down, okay, i’ll go wash the dishes , mom, no way in the world, just through my pipes, let’s go to bed, go to bed, go to bed, anna stepanovna, go to bed, let’s go, i can’t, the whole side was lying there, they put our leg here, so, that’s a good girl, that’s the punishment, from now on i’ll wash the dishes, and i saw how you wash those dishes, margarit mikhailovna, yes, you’re right. anna stepanovna, washing dishes is not my calling, let verochka do the washing, and i’ll cook. margarita mikhailovna, you yourself said that i can’t do anything. my dear, you forgot that i am an actress. and the ability to live in the proposed circumstances and reincarnate, and kavarapam. oh my god, where did the carnation go, i surrounded half the kingdom. to die and even in the hospital , why are you not feeling well at home, verochka and i love you so much, you will get well, we will sing so many old songs, i won’t g
, but she cannot stand the moscow climate, the doctors exiled me like tsar alexander sergeevich pushkinst on surgery. yes, no , nothing serious, anna stepana, just lie down and rest, but lie down, okay, i’ll go wash the dishes , mom, no way in the world, just through my pipes, let’s go to bed, go to bed, go to bed, anna stepanovna, go to bed, let’s go, i can’t, the whole side was lying there, they put our leg here, so, that’s a good girl, that’s the punishment, from now on i’ll...