juicy panels are all powder, there is snow and rain. they withstand the parts that are inside the machine, they apply the coloring method. spain by hand. after the parts are painted, they are transported by a chain conveyor, the length of which is about 30 km, to the assembly position. the frame is one of the main elements in the harvester ; subsequently , a driven drive axle is hung on this frame and a block of plugs is mounted. well, and, accordingly, then the frame turns over and all the remaining parts are mounted on the same frame. this is what one looks like from the largest workshops for the production of combine harvesters.

the first line of the conveyor all starts with it, a finished chassis is placed on the first satellite and the machine is being assembled step by step 28 technological satellites, on which a certain amount of work is performed in order to assemble the combine harvester, about 10,000 parts are used. one of the largest is the bunker, which is designed to accumulate grain , the maximum volume is 9.5 mm³. this is a threshing part, such as a cutting device, which separates the grain from kolobok in the common people, it is called a working house. this is a detail later that they do not play, they are intended somewhere in order to throw straw on the weapons of the machine. the engine, depending on the model of the machines, is used from 320 horsepower to 530, and today the engines of the workshop are used

by the russian yaroslavl production, this engine is placed on the slipway for the assembly position. here the multiplier is hung on it. pumps, all hydroxic radiator, knitted water air pipes. and further ready. we produce the work of a combiner, seasonal, it is rotated when the battle for the harvest is going on, so we take into account all the parameters so that it is convenient for him and the air conditioning system. we also install modern comfortable economic seats. each companion can adjust and stay in this seat for quite a long time and not experience discomfort. gradually moving on technology introduces the entire installation, hydraulics and electrics, almost half of the machine has already been assembled. on today the cycle is assembling

four models, how the machine will be assembled will depend on its performance. this is very important because this machine cleans. bread, bread, we have a head for everything and we currently have grain - this is the second gold. responsibility for the performance of his work in the map, he puts a mark. yes, work done. here is my position even when the machine leaves the field on the farm on the map, you can track who did the work and bring, if necessary, responsibility. day one from the second thread of the conveyor in total freshens 10 cars at the last stage, we put the wheels and the finished car is already moving out on the transfer conveyors, where it is filled with diesel fuel and antifreeze oil and sent to the break-in building from a century-old test. there is

a special slide where the parking brake is checked, a special track. or all the parameters are tested there, the car is checked at 19 km / h, if that’s normal, the car already arrives at the delivery site, where plastic facing hoods are installed. the car is being packed , preserved, already further already spinning consumers. let's talk about how to be open to the world, no matter what i'm always ready to pick up. i always say we can we will we want, because i'm very

sunbathing with really talented ideas, actually my main goal. uh, which we pursue if our citizen has an idea that can be commercialized. he must have every opportunity to realize it, which is why we are spinning. so what's more, here are many say the market. this is where the market needs to turn. what is theater answer energy exchange. and why it will always be the same, because people come, spectators come, and we give energy. you give us back , we have a cycle going on, and something happens we begin to think, breathe, live differently. uh, the sooner we teach our children to do good deeds correctly mercy and participation in helping those who need it? the healthier the generation grows up. say, don't be silent, watch on belarus 24 tv channel

. we are in the way is all in order to show you that ball tire barshere and give you a dry standing one, so it’s not from shurik that we’re investigating the story, the name thinks the son is curled with guests for people who know how and love to seduce guests, but bolyaskova, we’ll joke yakim’s meat with a rake at once with project on the pirate on the tv channel belarus 204

economic stability our flagships, thanks to the right very technical policy that the state pursues after gaining its independence, managed to maintain and even increase to develop precisely the design i believe, because everything that is done in factories begins in the designer. the ecological process of the harvester has always been like a secret behind all the seals, because to shoot a video

about how it happens, there is little grain moving 17 economic bodies. separation into fractions in the purification system does not work, so the new software that we recently acquired just allows us to simulate such processes to reduce the energy intensity of processes on the one hand, on the other hand , to increase the company's productivity grain hopper loading system, work, thresher, more devices, swamp hybrid scheme. such work requires quite a lot of time from the point of view of creating models from the point of view of the actual behavior of the calculations. it develops about 180 different types of gearboxes, which are used in the model range of all produced by muslims, in particular, we see the bridge, which is used on our combines. well, we make them for ourselves and supply them, among other things , to russian enterprises that need

such products, because they themselves are still only creating such production. until last year , everyone lived according to globalist patterns, when they said no, you don’t need to manufacture your own, you buy it from us, but your own does not develop. and after they said. no, we will not give you, then the price of all these, let's say, that the globalists draw for us, that is , you will not have your own. enterprise in the republic of belarus, no enterprise has such capacities. so, what

has allowed this to be done since 2009. we do not purchase any imported gearbox, not one completely since 2009. we have mastered about 86 units of new equipment, if earlier we bought it in germany, france, hungary, italy, now we have completely excluded purchases. everything that concerns technological units. this is also our production, we buy only what all factories traditionally buy. these are cuff comb bearings. well, that is, what is not in the profile at the moment is the concluded contracts with rostselmash for the production of final drives and boxes, starting this summer the car is up to 15. it would seem a small republic of belarus with a population 10 million, but at the moment we are faced with the task of reaching the tempo for the production of 3,000

combines. this is indeed a very significant figure, because rostselmash is russian, without producing anything itself, only assembling it, it produced friday, that is, it worked for it. so to speak, the whole of the former europe, and we work ourselves from blanks to finished parts. modern design technology for the manufacture of parts that exist in the world they are available, of course, and we have a 3d printer. or the so-called filigree and long-term work of a layout designer, or it is necessary it was necessary to make some kind of mold that would unbranch the designer made a 3d model, we gave it to the printer and during the work shift we have such a detail that is different, i don’t know such a simple technology. man

improvement it is endless, we have a pilot shop. after the documentation is ready. of course, we make samples in order to put them to the test. comes directly already 3d models. after that, we arrange direct processing on them, that is, we compose list of tools we compile a list of operations that are needed to process this part directly imposed processing. we can trace. will we get some kind of blow or some good accuracy. now, if here it is clear that everything is green, like more or less this, then we hit the accuracy completely. and then we start how to

tie the machine. we are conducting bench tests and identifying all the shortcomings that are purchased components, or products of our own production in order to in order to minimize the consequences of possible such deviations in the future, if we take

the whole complex, then about 15-20 products can be simultaneously tested in different directions. we have the opportunity to conduct tests all year round, so there is no seasonality based on the results of the winter testing period. we can already give some results to the designer or our other division that is engaged in field tests about those observations that we have identified subsequently, in order to either draw attention to them, or we revealed well in the field. because factories are mastering new parts every time , it is senseless and expensive; in general, development from the beginning to, say, the completion of the design experience due to the use of modern technologies has been reduced by almost two times and takes about three years. i think every

belarus can be proud, what is its own , because its always better than uncle dust or not, he will say no. you're not dignity, but themselves made it allows us the confidence to look fucking. what does the world lack for the world? i think the world there is not enough justice for a detailed conversation about the global and the innermost. there is an awareness that you are a member of society here. you can develop and realize yourself. any data about a person should be collected only to the extent necessary to achieve a specific

goal. that's when we talk about rallying. we must take into account the fact that this will affect everyone. i think it's short. it is rather an honor to be useful to the motherland and i want to apply all my strength, mental moral quality to my professional life experience only for the benefit of their state. i really wanted to hear it, i really wanted to hear this project markov nothing belarusian memorial complexes you have updates that we must not forget nikolinat was a project, yakiya was symbolic engineers. and i, as if in my cellar of a nobleman, that yon is not naturalistically nato, svetka and dagetul, the unknown detail and withering of the people’s popnikov’s memorial was kept on the right, the nerds of the state budget bester were carried away, then the memorial

was daring, hung with a komsomol construction site. here we slept with a full perch bifurcation crops are all trends. this here is the chances of a documentary cycle the memory of my land, but the fact that we are small. and remember, which are showing the history of one carriage, and the history of one carriage has the history of the whole people. look at the belarus 204 tv channel. in 1995, a problem arose in belarus with regard to grain harvesting equipment; in the years

, complex fleets of grain harvesting equipment were outdated ; and it was very expensive. and on that at the time, there were no such funds in the republic. during that period, too, the meeting of disagreements, so to speak, was running, of course, there were doubts if the competence in the development of these machines was the second technological solution, with the help of which the name was reoriented to the production of combine harvesters. our harvesters are adapted immediately for harvesting various

types of this and e, grain crops, and there are more than a dozen types of them and corn for grain and sunflower rapeseed. for this, special adapters are made excellent speeds, which develops our harvester, then 20 km / h, this speed is used when moving from one section to another. that is, one field to another. in general, depending on the model, the speed comes, well, up to ten kilometers per hour. and especially the influence of heavy machines on the soil, but not always useful, so we try to ensure that our machines have a minimum overall area.

the wide profile tire allows you to work on various backgrounds. this is also for drilled soils and helps, especially when moistening , to ensure patency and especially on peat bogs and sandy loam also allows you to work confidently throughout the harvesting period. for those conditions, generally low ground we have and modifications on the felt run or on the floor. in the far east, ahead of harvesting, especially soybeans, which are harvested somewhere in october in september during this period , a large amount of precipitation falls, the post is very capacious, so they do not allow harvesting cars even on wide-profile tires every year. exactly 80 is required there

; today there are such rubber-draining caterpillars of large widths, and they make it possible to reduce pressure on the mail more than three times, so that's exactly what mine including draw. today, our products are already known and respected, our equipment is one of the most profitable for consumers, because it has good performance in terms of performance, quality of work, and at a cost it is the most affordable. for more than 20 years, our enterprises have moved from the simplest primitive combine to the most complex science. capacious intelligent harvester. what is our kzs-21224 currently, which

has all the modern technical characteristics that are not inferior to foreign analogues, and in some parameters. even surpasses him as this year at the harvest he threshed six thousand. he grain outperformed his competitors such as jinarc class. 2124 this model has been produced since 2018 , the productivity of this machine is 21 kg per second 24 tons per hour. in our supercombine, the supercab is a comfortable cabin, which has a very convenient organic joystick video surveillance system. that is, we can observe everything that happens on the sides and behind the car is additional. there is a refrigerator with

the function of heating the air conditioner, which also creates comfortable conditions when working in the system combiner and automated vision. one works by satellite, and the second works by video, which is then processed by the intellect. cleaning up later. the only thing left is to race such buildings in the process of cleaning. today it is a harvester that is in steady demand and, given the trends, the future belongs

to productive machines after machines, which provide harvesting at increased speeds, once somewhere around 6-7 years, there are such periods when just the harvesting period has a lot of rain. and that's precisely the ability to work at higher speeds, which is inherent in a machine with a hybrid hammer and separation scheme. it gives an important advantage to those who have such a technique, because it is possible to work. i think that any person who works, but very masha is allowed to video in the car with the inscription muslims. he considers it his brainchild to create machine design and making a huge collective against

it alone. but this is beyond the power of today, more than 13,000 people work in the holdings. this is our team - this is the same harvester that needs to be set up to assemble. it is useful to assemble machines, but his work. we still provide the pleasure of the security of our country.

church of the holy trinity, gerd has an embodied symmetry,

which, according to noah, over the open space in the sharp vertical of its grandiose one of the highest will stay in belarus