as i told you how to do it, maybe you can help me there, if you are interested, i tried, i became interested, and we did this somewhere around the nineties, and i was already 30 years old then, so it went, went on, then more, then it became interesting, i began to improve, to see what kind of jewelry products exist, how it is done, and so i studied on my own and ... there was no information on where to master

the profession of a jeweler, then i didn’t even have any thoughts about becoming a jeweler, well, i was just interested in learning how to do this, this, this, this is it. what is a jeweler? i had it first of all, a jeweler is a technician who works with something small, and i was interested in these small forms. to achieve the required necessary result, i saw a picture or they told me what it should be or showed me some sample, so to do this in order to implement a technical project, let's say, first of all you need perseverance, you need multi-faceted thinking, not to beat yourself into one point, a multi-faceted technical solution, one thing didn't work out, another one did, another one didn't work out,

it will be the third, but it is better, of course, to think everything through in advance. i did not start with precious metal, so there was no particular need to think through in advance, then when i switched to precious metals, there i already understood that yes, i worked with silver at first, it was possible... to neglect somewhere because of the low cost , something did not work out, i redid it, but when it is gold, there you need to think first, then do, measure seven times, cut once, something like that, although there were cases when i hammered the product all over again, sluus, of course, first a technician jeweler, then an artist, perseverance, but somewhere an artist, yes, an artist must be present. otherwise you

must like it, like the final result, you must like to achieve this result. if you start with the simplest, there are ordinary ones, to which everyone is accustomed , it is clear to everyone, wedding rings, smooth, standard some profiles, now different profiles are in fashion, when i started, there was one profile, a hemisphere, they differed only in width, weight, width thickness, respectively weight, earlier, back in the days when... let's say, let's start somewhere earlier, when i started, filigree items were in fashion, these are also originally hand-made things, when jewelry is made from thin wire, assembling

constituent elements from this wire, some filigree, gladi, smooth - this is rolled, round wire, rolled into a rod, filigree, this is... thin wire twisted into a pigtail, it can be rolled, it is possible not to roll, from these elements of things small elements, then they are assembled, soldered, you can assemble them in pictures, that is, here you need to already happen, be able to draw something somewhere, be able to draw, but now no longer yes, now right now yes you need to be able to draw a jeweler, 3d printing, drawing, 3d printer, a picture is created on the computer, the program with the help of the printer makes a model, a prime model, the first model in some material, some material is usually wax, wax, well, not wax in the literal sense, but a polymer, which was then created

from this polymer, the printer printed, let's say, a ring, it is then replicated, molded, shaped, with a mixture, burned out, then poured into metal, poured into this pressing, it turns out to be burned out for now, metal is poured into it, the product is already in some metal, in silver, as a rule, then this model is finished, it is still a prototype, it is brought to an ideal state and rubberized, vulcanized, a rubber mold is created,

to answer, but to combine them later, of course, you need hands, experience, and vision, of course, the result, the hand of the master, yes, you can see, you can see, the hand of the master, you can, you can distinguish, that is, you can see right away where some elements are made by hand, some

elements were not made by hand, how the stones are fixed, say, how the metal is cut, that it is made by hand, made with gravers, not modern ones there... a day to sharpen and before the operation, before the instruments that need to be manually done every job, among the old masters, and i have many acquaintances among jewelers, you can immediately recognize, probably, this is the business, most likely. art, in addition to figrane, making chains, such a technical direction, from metal pouring to wire manufacturing, to manufacturing chain elements, because there are different chains and

different weaves, and it is not so easy to make all this, somewhere you need to guess how it is done, somewhere you need to think of something that can be... to invent something new, at one time, for example, i became interested in how the weaving of the chopard from round rings is made, wedding rings one after another, only small, small, small, that's how to do it manually, it is clear that there are machines where everything is already thought out and these are printed - chains, here to do it manually, well yes, i managed to do it, now there is a technology that works in this direction, manual production of the chopard brand, manual production using stamps, a stamp from... metal, a press, under the press, say, rolled gold or

silver or any other metal, under the press an image of something is pressed out, flesh to the development of products, then further manually it is already cut out with a jigsaw, well, it is assembled, completely manual production, when according to a drawing or a photograph or a sample, first a rolled product, a plate is made, on it draws... as a separate profession, who assembles something, solders separate elements, welds, assembles into the final form, right down to the size of the products, that 's the direction there is, then he hands over his work, say, to a fixer, if there are inserts, if there are no... inserts, then he does it completely to the end, or gives it to a polisher, if there is

such a division of jewelry work, well, when you do everything yourself, then everything, everything from beginning to end, from pouring metal, yes, even in workshops where there is centralized melting, anyway, you still have to pour the metal yourself, and from start to finish, poured, rolled, plate, drew, or drew on paper or or... glued a photograph to the metal, sawed, bent, assembled, trimmed, if inserts, then secured, the most expensive and the one that i probably will not forget, i never forget, it was a ring with a diamond, almost 8 mm in diameter, classic standard shape, cast, justification for the stone is called cast, made of white gold... of course, i fixed it all by hand at

the final stage at the stage of fixing the stone, there the ring needed to be fixed somehow to put the stone, because the cast was so airy, these prongs that hold the stone are very thin, and they needed to be fixed somehow so that they don’t bend, what to do there, i couldn’t think of anything else, how to put it on the kit paste, it’s like something like sealing wax. well, a special paste for fixing for mounting, so i’m fixing the stone, i hear a crack, a characteristic crunch, well, that’s it, i stopped, for about 15 minutes, i thought about what happened, i thought that i broke it, the stone was like that with characteristic defects, inclusion inside, i walked around for a long time, washed myself, then to my friend, the workbench in front of my workbench

, i said, i decided to take a look, i removed the paste, removed the stone, i looked, everything is fine, everything is in order, the disease goes away, after a couple of weeks of work, say, with gold, you are no longer afraid, it becomes just a building material with which you work, everything else, then everything works out, the pinnacle of mastery, you look at the products and do not understand how... how it was possible to do this and how much work had to be put in, how much skill, experience, intuition, editors club, the grain of fascism in europe never, nowhere...

watch the program cities of belarus on the belarus 24 tv channel. belarusian citizens,

who with their own hands jump even to this hour to gain knowledge.

we are in the village of terablichi, stolin district, bryssk region, in the center of wooden sculpture, the village of

terablichi, where i work. i know these riches of our palashuks, which i have collected here, here are the various legends, fallen tales, tales that i illustrate in my works in the tree, in life, graphics, this - everything needs to be told the stories of our people are gone, i usually begin with... my story like this from our happy church, that we would have such a chalavek, who was called likhvan, here are the likhvans, as if they had killed the chicks of the tsyalya, here you go, forsaken our goals to everyone to the family, from the cerebles,

who live here, from the getag tsyala.

the boys are all bald, i was told, and they would be so reasonable, so the geta apostled likhvan, like a bachytse, all the geta think in every family, like him. cashew's strong horns, because he does not step out of the way, such persistent, practical, such, and at the same time and dzetsi ichniya this is my face, because their nature is tsvorda, this is how it is. here is such a thing, i'm a cossack, there is no bread , there is no food

, there is no bread, there is no bread, there is no bread, and the borsum family has taken away the skin, because the nature is bad there , and that's why it's so bad wat in the breadwinner galava bo there maladzia young geta beauties the wheels were raging. the courtyard is clean, but there was no other century, the pagad of the udzyal fos, because they went to the church, there were healers, well, he’s an astavian tulabets,

because he’s a lad, a maladzian, they all disbanded, and now this is the time when people live, are born, get married and die, there are three periods in each of our lives, so we have to have this period...

together with foreigners, and we call it the lord's house, or indeed the stuakon house, yes the lord's house, well in honor of, let 's say, the owner of this estate stanislav glasko, here it turns out, which is an old lantern, all these lanterns are lit 17, every day and every day manually burns and gases, and you yourself gases then, at what time is 6:30. watch on the belarus 24 tv channel. we we will tell you about the diversity of belarusian cuisine.

the recipe for a very interesting dish of the old believer people - bulbashniki with krepoch. potatoes were boiled in their skins, then the skin was removed from the hot food, they were pounded for a long time in this mortar, then they made a small sausage, cut such circles. for some, this is just a soviet braid, but in fact, ... this pastry has a thousand-year history, we will witness the birth of culinary masterpieces, if you want to have a delicious breakfast, cook breakfast yourself, i thought i met marina. marin, hello, hello, so, now we're going to decorate it, for this we have banana, marmalade, ice cream and caramel tatyn. and we'll make a detailed gastronomic map of our country. so, what is challah? challah is traditionally white bread, a white braided bun that jews eat on shabbat. so i'm absolutely happy, do you know why? because i was.