using the hensel saw the clothes hangers along the cutting on. when you've completed that step measure out the positioning of the hangers on the wooden board first measure the desired distance to the outside edges. exactly as decided on a distance of ten centimeters. the side five to the top and six point five to the bottom use the pencil to mark where you want the drill holes to be starting with the first pencil mark make it cross above and below it twelve centimeters so that all six clothes hangers can be placed equidistant from each other then draw the holes with a wooden bit you can smooth out the drilled holes with a piece of sandpaper. in order to hang the coat track put the cabinet suspension brackets on the reverse side first drill the holes fill them with the flat drill bit you can find those in every hardware store along with this is a bench in brackets. now you can paint the wooden plank as desired on all sides allow the paint to draw authority that takes about half an hour which will paint then seal the surface using transparent wes a