invite you to the next stage of our master class, the project designers ksenia mayakina and irzikha nadanovay what we need now let's make it, you need to lightly knead the clay like dough in the kitchen, so we'll test your skills about the ready-made ones. for reliable adhesion, we comb the elements with a metal comb, and then lubricate them with glue from the same clay diluted with water. clay is plastic and can be corrected, make it more symmetrical. it won't dry out in a minute now. it will dry for a very long time, so yes, you have the opportunity to make it more even. but before sending the workpiece for drying, we make six holes of different diameters in it. what do you think it looks like? what if? we made the fourth hole, i would have thought of something else, now i have no options, yes volodya thought that this was a hole for the legs, but this piece is for the arms, that’s what it is. this is a small billiard table class, drying in a muffle furnace at a low temperature will take about a week, then another day will be spent on firing at 1100°. but we already have a workpiece that w

the designers of the project, ksenia mayakina and irzikha nadanova, decided to decorate the interiorwe will now produce. you need to lightly knead the clay like dough in the kitchen. so let's test your cooking skills. this is how you knead it a little. the clay piece must be turned over frequently so that no tension remains in it. and it’s better to roll out on belting, heavy dense technical fabric, so that it doesn’t stick, with a wet sponge we give the workpieces smoothness, cut it out of one piece rectangle, we divide the second into strips, no special perfectionism is required, but clay is such a living material, yes, which even during firing can bend a little, either turn in our favor or not, for reliable adhesion we comb the elements with a metal comb and then lubricate glue from the same clay. diluted water. clay is plastic and can be corrected to make it more symmetrical. it won't dry out for minutes now. it will dry for a very long time, so yes, you have the opportunity to make it more even. but before before sending the workpiece to dry, we make six holes of different diame