o. theake the offices into glass shop. we pick out the right size tubing for the right size. from there we he up the glass tubing. glass ines heat the excess of 1000 degrees in order to get into its mold. we heat up and bend the glass tubing to match the template, one of our chandeliers has over 100 different bend in it so each one of those has to be marked for our events. we have two of -- allow -- we have to allow the glass to cool so it can he backed up and be molded. it turns into spaghetti and we have to make sure that that life back up to the two core in the template. connect our mouths to the tubes and create a volume that is closed and we can control the pressure. there is just a variety of challenges that come up inherently in working with class. stress,n crack due to sometimes you would us have it and almost to do when it gets to it is just crack. do is crack.ts to then we have to go in and use the crossfire, the hand torch and weld all of those pieces together. then we weld electrodes onto either end. each step is very specific. this -- i dropped from 70 different