and control systems, but as the industry develops, more and more solutions are emerging, notes ivan antsov director of the developer radar mms. today we are actively working in the field of import substitution and from radio-electronic unit units, well, let’s say here the autopilot, today we are replacing servo drives, the computers that are on board, well, firstly, there are different types of ethereal vehicles. this also includes tests for ordinary devices, they can be carried out in a wind tunnel, for hydrodrones landing on water in a special hydrodynamic pool, but this is the test for... then the drones are tested in the field, only after that can we begin serial production. a prerequisite is registration of the aircraft with the federal air transport agency. for heavy drones weighing more than 30 kg, the requirements are increased; a certification procedure is needed here. within the framework of the national project, the time frame for certification costs is expected to be reduced, this is extremely necessary, given that heavy drones can be useful for transporting large volumes of ca

and control systems, but as the industry develops, more and more solutions are appearing, notes ivan antsovector of the radar mms developer. today we are actively working in the field of import substitution and from radio-electronic units, well, let’s say there is an autopilot here, today we are replacing the servo drive. the computers that are on board, well , firstly, drones of various types come with internal combustion engines, with electric motors, and in both cases we have made great progress in this regard in our country today. the full cycle of creating a new model of a domestic drone, from design on paper to production at the enterprise, takes 3.5-4 years, this also includes tests, for conventional vehicles they can be carried out in a wind tunnel, for hydrodrones landing on water. v a special hydrodynamic pool, but the test of strength does not end there. behind these heavy doors is a climate chamber. here, drones are tested in weather conditions, heat and cold from minus to +70 and humidity. then the drones are tested in the field, only after which can they begin serial productio