we we are located near the reactor building, directly next to the transport gateway overpass, throughass, nuclear, fresh nuclear fuel is loaded and delivered, the fuel for our reactor plant, of course, is lightly quenched uranium dioxide 235. this is a model, a model of that same fuel pellet, the weight is about 4.5 g, in terms of heat output, this fuel pellet is equivalent to 400 kg of coal for clarity or 360 m3 of natural gas, these pellets are filled into a sealed tube, which is made of high-strength zirconium alloy. and this whole element is called, and then from these fuel rods a fuel assembly is formed, a metal product, if you take its cross-section, it looks like a honeycomb, the weight of this fuel assembly is approximately 800 kg. fuel into the reactor. 163 pieces in the reactor, a controlled chain reaction occurs, during which the core heats up, about 1600 °. the primary circuit water circulates, and heat is removed from the fuel assemblies through the reactor by the primary coolant circuit and its transportation to the steam generator, in the steam generator the water of th

we are near the reactor building, directly near the transport gateway overpass, through the transportel is loaded and delivered, the fuel for our reactor plant, of course, is weakly enriched uranium dioxide 235, this is a model, a model of that same fuel pellet, weight about 4, 5g and in terms of heat output, this fuel pellet is equivalent to 400 kg of coal, visualization or 360 m3 of natural gas, these pellets are filled into a sealed tube, which is made of high-strength zirconium alloy, and the entire element is called tvel, and then a fuel assembly is formed from these fuel rods. a metal product, if you take its cross-section, it looks like a honeycomb; the weight of this fuel assembly is approximately 800 kg. fuel is loaded into the reactor in the form of these fuel assemblies; 163 of them are installed in the reactor. a controlled chain reaction occurs in the reactor, during which it occurs. core heating is about 1,600°. the primary circuit water circulates, and heat is removed from the fuel assemblies through the reactor coolant of the primary circuit and its transportation, acc

we are near the reactor building, directly next to the stktransport gateway, through the transport gateway overpass for our reactor plant is carried out. uranium dioxide 235, this is a model, a model of that same fuel pellet, weight is about 4.5 g. in terms of heat release, this fuel pellet is equivalent to 400 kg of coal for clarity, or 360 m3 of natural gas, these tablets are filled into a sealed pipe, which is made of high-strength zirconium alloy , and this whole element is called tvl, and then... from these the fuel assembly is formed from the fuel rods. a metal product, if you take its cross-section, it looks like a honeycomb; the weight of this fuel assembly is approximately 800 kg. fuel is loaded into the reactor in the form of these fuel assemblies. there are 163 of them installed in the reactor. a controlled chain reaction occurs in the reactor, during which the core heats up to about 1600°. circulation of the primary circuit water occurs, through the reactor heat is removed from the fuel assemblies by the primary circuit coolant and its transportation accordingly to the steam generator.